Swastik Fire Extinguisher Stand Stand Mild Steel – 2kg (MOQ – 4 Pcs)
Description
Swastik Stand Mild Steel – 2kg offers a stable and accessible storage solution for the specific types of fire extinguishers. These Stands provides a practical and accessible storage solution, enhancing safety preparedness in a wide range of industrial, commercial, and institutional settings.
Swastik Trolley Type Foam with Co2 Type Fire Extinguishers – 45 ltr
Description
Swastik Trolley type Fire Extinguishers – 45 ltr Foam with Co2 Type is a portable fire safety device designed to extinguish Class A and Class B fires, using foam to effectively smother flames and prevent re-ignition. The Foam has the ability to creep over the burning liquid or to soak into burning materials such as settees. Fully reliable. Controlled discharge. Supplied with wall bracket.
Swastik Trolley Type Water Cartridge Fire Extinguishers – 45 ltr
Description
Swastik Trolley Type Water Cartridge Fire Extinguishers – 45 ltr are Suitable for class A Fire. The use of the Water type Extinguishers an ideal unit virtually for all common fire risks and especially suited to Paper, Textile Cloths, Wood Furniture and Timber shops, Department Stores, Hospitals, Educational instituitions, Ware houses etc. Water type extinguishers are supplied in both Cartridge type and Stored Pressure type 45 ltrs. These Extinguishers are easier to use than other type of fire extinguishers because of its lightweight and user friendly design.
Swastik Trolley Type Water Cartridge Fire Extinguishers – 45 ltr
Description
Swastik Trolley Type Water Cartridge Fire Extinguishers – 45 ltr are Suitable for class A Fire. The use of the Water type Extinguishers an ideal unit virtually for all common fire risks and especially suited to Paper, Textile Cloths, Wood Furniture and Timber shops, Department Stores, Hospitals, Educational instituitions, Ware houses etc. Water type extinguishers are supplied in both Cartridge type and Stored Pressure type 45 ltrs. These Extinguishers are easier to use than other type of fire extinguishers because of its lightweight and user friendly design.
System Sensor SYS-HS Hooter Cum Strobe
Description
System Sensor SYS-HS Hooter Cum Strobe is a high-performance fire alarm notification device designed to provide both audible and visual alerts during emergency situations. Ideal for indoor applications, it ensures that fire alarms are clearly heard and seen, even in noisy or low-visibility environments.
System Sensor SYS-HS Hooter Cum Strobe
Description
System Sensor SYS-HS Hooter Cum Strobe is a high-performance fire alarm notification device designed to provide both audible and visual alerts during emergency situations. Ideal for indoor applications, it ensures that fire alarms are clearly heard and seen, even in noisy or low-visibility environments.
This combination sounder and strobe is compatible with most fire alarm panels and is widely used in commercial buildings, residential complexes, hospitals, offices, and industrial facilities
TC810R1024 Relay Module
Description
The Honeywell TC810R1024 Addressable Relay Module provides the system with a dry contact output for activating a variety of auxiliary devices, such as fans, dampers, control equipment, etc. Addressability allows dry contact activated, either manually or through panel programming, on a select bas through panel programming, on a select basis.Honeywell TC810R1024 uses on of 159 possible module addresses on a SLC loop. Additionally, It responds to regular polls from the control panel and reports its type and status, including the open/normal/short status of its Notification Appliance Circuit.
TNA Addressable Single Input/output Module
Description
TNA Addressable Single Input/output Module-TX7210 is characterized as one input or output volt free relay and control module. The TX7210 unit is normally used for overriding equipment such as lift return, door holder, smoke extract fans, air handling unit, auto dialler to fire brigade, BMS and etc.
TOA Ambient Noise Control Module, AN-001T
Description
TOA Ambient Noise Control Module, AN-001T is a Plug-in Module of 2-channel Ambient Noise detector designed for use with the 9000 series Amplifiers. It Automatically adjusts the Output Volume in response to the change of ambient noise level. The AN-001T can Handle input signals from Microphone level (-60 dB) to line level (-10 dB) by controlling the gain in 9 steps. Phantom Power (Plus 24 V) can be supplied for Condenser Microphone use.
TOA Assignable Volume Controller, ZM-9012
Description
TOA Assignable Volume Controller, ZM-9012 is Designed for exclusive use with the 9000M2 Series or M-864D, the ZM-9012 is a Wall Mounted Remote Control Panel having a Volume Control Knob. It is used in conjunction with the RC-001T Remote control module or M-864D. It can be mounted in a standard 1-gang electrical box in the wall.
TOA AUX Module, U-13R
TOA Input / Output Control Module, C-001T
Description
TOA Input / Output Control Module, C-001T is a Control I/O Expansion Module Designed for use with the 9000 Series Amplifiers and can provide up to 8 Channels each of Input and Output expansion. Since the Main unit has 4 Preinstalled Inputs and Outputs each, the Control Input and Output can be expanded to up to 12 Channels each when the C-001T is Used.